Immersion heaters are the
heaters which are used mainly for
heating water, oils, mineral oil,
vegetable oil, fuel oil, chemicals,
alkaline, acidic & non-acidic solution
kept in tanks.
heaters are sheathed in S.S. or mild
steel or incoly tube or copper as per
the requirement. The dia of tube is
available from 8.2 mm dia onwards. This
heater is fitted to the tank through a
check nut for horizontal (through the
side) mounting or with flange for
vertical (over the side) mounting.
The size of check nut or flange is 11/4
" to 21/2 BSP.
Electrical Data :
In any voltage
& wattage depending upon the surface
area of heaters.
Working Temperature :
temperature of immersion heater could go
upto 600°C depending upon sheathed
material & process application.